Introduction

Chinese – made lawn mowers have gained popularity worldwide due to their high – quality and cost – effectiveness. Here are some essential operating tips to ensure you get the most out of your lawn mower.

Pre – operation Checks

Fuel and Oil

Before starting your lawn mower, check the fuel level. Use clean and fresh fuel to ensure smooth operation. Also, check the oil level. If it’s low, add the recommended type of oil as specified in the user manual.

Blades

Inspect the blades for any signs of damage, such as dullness or chips. Sharp blades are crucial for a clean and even cut. If the blades are dull, sharpen or replace them according to the instructions.

Safety Features

Verify that all safety features, like the dead – man switch and blade guard, are in proper working condition. These features protect you from potential accidents during operation.

Operating the Lawn Mower

Starting

Follow the correct starting procedure in the user manual. Usually, it involves priming the engine, setting the choke, and pulling the starter cord smoothly. Once the engine starts, let it warm up for a few minutes.

Mowing Pattern

Choose a mowing pattern, such as parallel rows or a checkerboard pattern. This ensures an even cut and prevents the grass from being flattened in one direction.

Cutting Height

Adjust the cutting height according to the type of grass and the season. In general, don’t cut more than one – third of the grass blade length at a time to keep the grass healthy.

Post – operation Maintenance

Cleaning

After mowing, turn off the engine and wait for it to cool down. Then, clean the lawn mower thoroughly. Remove grass clippings from the deck, blades, and wheels to prevent rust and ensure proper functioning.

Storage

Store the lawn mower in a dry and secure place. If you won’t be using it for an extended period, drain the fuel and oil to prevent corrosion and damage to the engine.