Introduction
Chinese – made lawn mowers have gained popularity worldwide for their high – quality and cost – effectiveness. Here are some essential operating tips to make your lawn – mowing experience better.
Pre – operation Checks
Fuel and Oil
Before starting the lawn mower, check the fuel level. Use the recommended fuel type specified in the user manual. Also, check the oil level. Low oil can damage the engine. If the oil is dirty or at a low level, replace or refill it accordingly.
Blades
Inspect the blades for sharpness and damage. Dull or damaged blades can tear the grass instead of cutting it cleanly, leading to an uneven lawn and potential grass diseases. Sharpen or replace the blades as needed.
Wheels and Handles
Ensure that the wheels are properly inflated and can rotate freely. Check the handles for any loose parts or damage. A stable and comfortable handle is crucial for safe operation.
Operation Process
Starting the Mower
Follow the correct starting procedure in the manual. Usually, it involves setting the choke, priming the engine (if required), and pulling the starter cord. Do not yank the cord too hard to avoid damage.
Mowing Pattern
Choose a consistent mowing pattern, such as rows or a spiral. This helps to ensure an even cut and prevents missed spots. Overlapping slightly with each pass can also improve the uniformity of the lawn.
Speed and Pressure
Push the lawn mower at a steady speed. Avoid pushing too fast, as the blades may not cut the grass effectively. Also, do not apply excessive downward pressure, as it can strain the mower and damage the grass roots.
Post – operation Maintenance
Cleaning
After mowing, turn off the mower and let it cool down. Then, clean the mower deck, blades, and wheels to remove grass clippings, dirt, and debris. This helps to prevent corrosion and keeps the mower in good working condition.
Storage
Store the lawn mower in a dry and sheltered place. If you won’t use it for an extended period, drain the fuel to prevent it from going bad and causing engine problems.