Introduction

Chinese – made lawn mowers have gained popularity worldwide due to their high – quality and cost – effectiveness. Here are some useful operating tips to ensure you get the most out of your lawn mower.

Pre – operation Checks

Inspect the Blades

Before starting the lawn mower, check the blades for any signs of damage or dullness. A sharp blade cuts grass cleanly, promoting healthier grass growth. If the blades are dull, sharpen or replace them as needed.

Check the Oil and Fuel

Verify that there is enough oil in the engine. Low oil levels can cause engine damage. Also, ensure the fuel tank is filled with the appropriate fuel. Use fresh fuel for better performance.

Look for Obstacles

Walk around the lawn to identify and remove any stones, sticks, or other debris that could damage the lawn mower or be thrown by the blades.

Operating the Lawn Mower

Adjust the Cutting Height

Set the cutting height according to the type of grass and the season. In general, it’s better not to cut more than one – third of the grass blade length at a time. This helps maintain the health of the grass.

Mow in a Pattern

Mow in straight lines or a pattern to ensure an even cut. You can alternate the mowing pattern each time to prevent the grass from leaning in one direction.

Avoid Overloading

Don’t try to cut overly long or thick grass in one pass. If the grass is too long, make multiple passes at different cutting heights.

Post – operation Maintenance

Clean the Lawn Mower

After mowing, clean the grass clippings from the deck, blades, and other parts of the lawn mower. This helps prevent rust and keeps the mower in good working condition.

Store Properly

Store the lawn mower in a dry, sheltered place. If it won’t be used for an extended period, drain the fuel and oil to prevent corrosion.