Introduction

Chinese – made lawn mowers have gained popularity worldwide for their quality, affordability, and performance. To ensure you get the most out of your lawn mower, here are some valuable operating tips.

Pre – operation Checks

Fuel and Oil

Before starting the lawn mower, check the fuel level. Use clean, fresh fuel for optimal performance. Also, check the oil level. If it’s low, refill it with the recommended oil type as stated in the user manual.

Blades

Inspect the blades for sharpness and damage. Dull or damaged blades can tear the grass instead of cutting it cleanly. If needed, sharpen or replace the blades.

Air Filter

A dirty air filter can reduce engine performance. Check the air filter regularly and clean or replace it according to the manufacturer’s instructions.

Operation

Starting the Mower

Follow the starting procedure in the user manual. Usually, it involves setting the choke, pulling the starter cord, and adjusting the throttle. Make sure the mower is on a flat, stable surface when starting.

Mowing Pattern

Adopt a consistent mowing pattern, such as mowing in straight lines or in a circular motion. This will ensure an even cut and make your lawn look more aesthetically pleasing.

Grass Height

Adjust the cutting height according to the type of grass and the season. Generally, it’s better not to cut more than one – third of the grass blade at a time to keep the grass healthy.

Post – operation

Cleaning

After mowing, turn off the mower and let it cool down. Then, clean the grass clippings from the deck, blades, and wheels. This will prevent rust and keep the mower in good condition.

Storage

Store the lawn mower in a dry, sheltered place. If you’re not going to use it for an extended period, drain the fuel and oil to prevent damage to the engine.