Introduction
Chinese – made lawn mowers are known for their high – quality, durability, and cost – effectiveness. To ensure you get the most out of your lawn mower, here are some essential operating tips.
Pre – operation Checks
Fuel and Oil
Before starting your lawn mower, check the fuel level. Use clean and fresh fuel. Also, check the oil level as per the manufacturer’s instructions. Low oil can cause engine damage.
Blades
Inspect the blades for sharpness and damage. Dull or damaged blades can tear the grass instead of cutting it cleanly, leading to an uneven lawn appearance and potential grass diseases.
Safety Features
Ensure all safety features such as the blade guard, safety switch, and anti – vibration handles are in good working condition. These features protect you from potential injuries during operation.
Operation
Starting
Follow the correct starting procedure. Usually, it involves setting the choke, priming the engine if required, and then pulling the starter cord gently but firmly. Once the engine starts, adjust the choke as per the instructions.
Mowing Pattern
Adopt a consistent mowing pattern, such as mowing in straight lines or a checkerboard pattern. This helps achieve an even cut and reduces the chances of missing spots.
Cutting Height
Adjust the cutting height according to the type of grass and the season. Generally, it’s better not to cut more than one – third of the grass blade length at a time. This promotes healthy grass growth.
Post – operation
Shutting Down
Turn off the engine following the proper shutdown procedure. This usually involves moving the throttle to the idle position and then turning off the ignition switch.
Cleaning
After each use, clean the lawn mower. Remove grass clippings from the deck, blades, and air filter. This helps prevent rust and keeps the mower in good working condition.
Storage
Store the lawn mower in a dry and protected place. If it’s going to be stored for an extended period, drain the fuel and oil to prevent corrosion and damage to the engine.