Introduction

Lawn mowers are essential tools for maintaining a beautiful lawn. However, operating them properly is crucial for both your safety and the health of your lawn. Here are some valuable operating tips to help you get the most out of your lawn mower.

Pre – operation Checks

Inspect the Lawn: Before starting the mower, walk around the lawn to pick up any debris such as sticks, stones, or toys. These objects can damage the mower blades or be thrown out during operation, posing a safety hazard.

Check the Mower: Examine the mower for any visible damage, loose parts, or leaks. Ensure that the blades are sharp. Dull blades can tear the grass instead of cutting it cleanly, which can lead to a less healthy lawn.

Check the Fuel and Oil: Make sure there is enough fuel in the tank. If your mower has an oil – powered engine, check the oil level and top it up if necessary.

Operating the Mower

Use the Right Technique: Push the mower at a steady pace. Don’t rush, as this can result in an uneven cut. Overlapping each pass slightly will ensure a more uniform look.

Adjust the Cutting Height: Set the cutting height according to the type of grass and the season. Generally, it’s better to cut the grass a bit higher in the summer to help it retain moisture.

Change Directions: Avoid mowing in the same direction every time. Changing the mowing pattern helps prevent the grass from leaning in one direction and promotes more upright growth.

Post – operation Maintenance

Clean the Mower: After use, turn off the mower and let it cool down. Then, clean the deck and blades to remove any grass clippings and dirt. This helps prevent rust and keeps the mower in good working condition.

Store Properly: Store the mower in a dry, protected place. If it’s going to be stored for an extended period, drain the fuel and oil to prevent corrosion.