Chinese – made lawn mowers are known for their high – quality and cost – effectiveness. Here are some valuable operating tips to ensure you get the most out of your machine.

Pre – operation Checks

Before starting your lawn mower, it’s essential to conduct a few checks. First, inspect the blades. Make sure they are sharp and not damaged. Dull or damaged blades can result in an uneven cut and put more strain on the engine. Second, check the oil level. Just like a car, your lawn mower needs the right amount of oil to function properly. Low oil can cause engine overheating and damage. Finally, examine the fuel tank. Ensure there is enough fuel for the job, and the fuel is clean and fresh.

Starting the Mower

When starting a Chinese – made lawn mower, follow the manufacturer’s instructions carefully. Most mowers have a primer bulb that you need to press a few times to get fuel into the carburetor. Then, set the choke according to the temperature. In cold weather, use the full choke setting, and in warm weather, a partial or no – choke setting may be sufficient. Pull the starter cord smoothly and firmly until the engine starts.

Mowing Techniques

For an even cut, mow in straight lines. Overlap each pass slightly to avoid leaving uncut strips. Adjust the cutting height according to the type of grass and its growth stage. Cutting the grass too short can stress the grass and make it more susceptible to diseases. Also, don’t mow wet grass if possible, as it can clog the mower and result in an uneven cut.

Post – operation Maintenance

After you finish mowing, turn off the engine and let it cool down. Empty the grass catcher to prevent mold and mildew growth. Clean the underside of the mower deck to remove grass clippings and debris. This helps prevent rust and keeps the mower in good working condition. Periodically change the oil and air filter as recommended by the manufacturer.